The Big Air Fusion wakeboard tower is one of the best aftermarket wakeboard towers available. This wakeboard tower is on par with any OEM tower you would get from the major companies like Malibu, Moomba, and Centurion but without the inflated price! This rack has all the goodies such as a brushed finish, universal mounts, ultra-rigid frame, and swiveling rope head.
This Big Air Fusion tower is strong - it has been load tested beyond 1,500lbs! Whether you have a wakeboarder loading up lots of line tension or are pulling a couple tubers, you can rest assured this tower is going to take anything you dish out to it.
No drilling - installation is simplified by not needing to drill through the tower. Of course, you'll still need to drill through the hull to make your connection points, but this rack is designed so that the rack's width is adjustable without having to drill into the crossbar! Approximate install time after mount installation can be less than one hour!
One of the coolest features about the Big Air Fusion tower is its ease of integration with Big Air racks. The Fusion tower has built in mounts that accept Big Air's series of single bolt racks. This is awesome because it means setting up a complete tower and rack system is super convenient. No need to stress over clamp sizing and proper alignment, there is literally only one bolt standing in the way between you and a working rack system! We carry all of Big Air's one-bolt racks - we recommend checking out the Big Air Wakeboard Rack | Aluminum.
Why do I need a wakeboard boat tower?
Wakeboard tower racks might seem like an expensive add-on for your boat. But once you've spent a season out on the water with a wakeboard tower, you'll wish you had gotten one sooner. Wakeboard towers were orginally designed to provide a higher anchor point for the rope to attach to. This higher attachment point meant bigger air for wakeboarders because the rope pulled up instead of down on the rider when they flew through the air.
Now, wakeboard towers are so much more than that. No longer is the wakeboard tower an elite wakeboarder tool, but it is now a general utilitarian device for almost all boat owners. Adding a tower to your boat is like adding an addition to your house - it gives you more space. Wakeboards, kneeboards, wakesurf boards can all be stored up in tower racks to free up a ton of room on your boat's floor. Additionally, with tower speakers and lights you have features that were never possible before.
The Big Air Fusion Tower features:
Please note, returned boat towers will incur a restocking fee.
Cracking near the tower legs is a valid concern, but can be easily addressed with proper installation of your tower. When doing the installation of a Big Air tower, the manufacturer requires the hull to be AT LEAST 3/8" thick. If the hull is not 3/8" thick, you will need to reinforce the hull. You can reinforce with flat sheet metal (aluminum or stainless), marine grade plywood, or even additional fiberglass. In most cases,1/4" thick reinforcement is more than sufficient. When reinforcing, it is best to cover a large area, about 6" x 9". We understand you are working with a small area and sometimes that large of an area cannot be done. Work with what you have to ensure you are at or above 3/8" thick.If you follow these guidelines, and Big Air's other installation instructions (included) then you shouldn't have any cracking issues.
(Including Alaska and Hawaii)
Great News - We have a dedicated International Store just for you!
It looks like you are visiting from outside the continental United States. If you would like to shop and ship any products outside the continental United States you must order from our International Store. It is optimized specifically for our customers outside of the continental United States.