The Clear SUP Wall Rack is an excellent display rack for your stand up paddleboard. Made from crystal clear cast acrylic, this is not to be confused with those greenish or cloudy polycarbonate knockoff "clear" racks. This rack is made from 1/2" thick acrylic and has a 75lbs weight rating. Plenty for even your larger SUP!
This clear SUP rack is designed to hold your board parallel to the wall. This keeps it tight up against the wall and makes for a great display for your surfboard. You can hold your board with the fins facing in or out. If your board has a long fin, then beware you may need to remove it if you want to store your board with the fin facing the wall.
This rack is great looking and easy to install. Instructions were easy to follow and rack looks clean on the wall.
My issue was i didn't check the depth of the board. my board is 6.5 inches deep and this rack holds 5 inches. luckily, i had another board i could use with it and fit the board i wanted in another rack.
This rack is everything they said! I made my own hollow wood stand-up paddle board from a Brad Tucker kit, and was worried that at 4.5" thick, I wouldn't find a rack wide enough. This one did and it looks great in my recently re-done garage. Instructions were clear and the racks are very sturdy - much thicker gauge acrylic than I expected. I would recommend this highly!
I researched my Paddleboard racks just like I researched for my new Paddleboard. I took the time to seek out quality, aesthetic appeal and price points. The Clear SUP Wall Rack is the best Paddleboard rack on the market. It is solid in quality, supports the weight of the Paddleboard to an upright position, so it leaves no tilt to avoid scratches on the board or markings on the wall. They are aesethically appealing with the clear brackets leaving a pristine look on the wall. The dimensions fit perfectly for both the board and enough room to hold the paddle as well. I am beyond pleased with these racks. I normally don't take the time for reviews, but I was so satisfied with my purchase and the way they look in my garage with my new beautiful Paddleboard on display, it was worthwhile to do. I highly recommend this product!
I mounted 2 boards on my wall, one above the other. These were the only racks that allowed that in the space I had. The lower height allowed the boards to both be pulled out without lifting them too high. The 5" width is perfect to hold boards securely but not with a ton of extra room. Plus they look great.
Will this hold a 11'6 paddle board that weighs about 40 pounds?
This SUP rack, if properly mounted to wall studs, can hold a board up to 75 lbs, so the weight should be fine for your board. The length is not an issue as you set the arms up as far apart as needed to support the overall length of the board. If your board is more than 5.5" thick, it would not work -- the area that the SUP sits in the rack is 5.5" wide, so that is the maximum thickness board it can hold. If your board is less than 5.5" thick, it should be fine.
(Including Alaska and Hawaii)
Great News - We have a dedicated International Store just for you!
It looks like you are visiting from outside the continental United States. If you would like to shop and ship any products outside the continental United States you must order from our International Store. It is optimized specifically for our customers outside of the continental United States.