The Double Wakesurf Rack is designed for thicker boards. There are many wakeboard racks on the market, but very few come with wide enough slots to handle your wakesurf boards. This one has two 2.4" wide slots for dual wakesurf storage. The racks are constructed of high quality billet aluminum and are designed for a life in the sun and salt water. Whether you choose powder-coated black or polished aluminum you can confidently know that these racks won't rust.
One of this rack's best features is the single bolt attachment point. With the single attachment bolt, you can have the rack removed or placed back on your tower in no time. Having the quick release feature is great for a couple of reasons. For security reasons, it allows you to remove the rack quickly after each season in order to prevent theft while your bolt is in storage. Second, if your boat needs to fit into a tight space or you want to fold your tower down, then having the ability to quickly remove the rack is a huge convenience.
Each rack comes with an adjustable clamp that will fit 2", 2.25", and 2.5" tubing sizes for towers. The clamp is the component that will attach your rack to your boat's tower. Another benefit of the single bolt attachment point is that it allows rotational adjustment relative to the clamp. Meaning, no matter how the clamp is attached to your tower, you have the ability to set the rack level to the horizon. This is critical if your rack's tower is not perfectly vertical (most aren't). As an important note, you will need to check your particular tower and ensure that it is one of these sizes in order for this rack to fit properly.
How do I figure out what my tower tubing size is?
Once you determine the perfect spot for your new wakeboard tower rack, get a piece of string and loop it around the tower. Then, measure how long the string was that went around the tower - this is your circumference. Use the table below and read across to find out what diameter tubing your tower is. If your tower's tubing size comes out to 2", 2.25", or 2.5", your tower can accept this rack's clamp. If it doesn't, don't worry, we carry a large selection of racks that will fit your needs. We recommend checking out the Wakesurf Boat Tower Rack | 2 Boards if you need different clamp size options.
|Circumference (inch)||Diameter (inch)||Diameter (inch) Fraction|
This Double Wakesurf Rack also comes with the option of a polished aluminum swivel add-on. The swivel add-on is a special mechanical device that sits between your rack and the clamp and allows the rack to swivel around. Why this is such a great feature is that it allows you to load and unload wakeboards from the rack with ease. When the rack is in its normal storage position, it has the wakeboards facing out and away from the boat which means you have to lean out over the water to get your board in and out of the rack. With the swivel, you can swing your boards around to face you on the inside of the boat - a huge convenience! We highly recommend a swivel -see the video below for more information.
(Including Alaska and Hawaii)
Great News - We have a dedicated International Store just for you!
It looks like you are visiting from outside the continental United States. If you would like to shop and ship any products outside the continental United States you must order from our International Store. It is optimized specifically for our customers outside of the continental United States.