This combination Kneeboard and Wakeboard Rack takes care of your storage need on your boat. If you like to kneeboard, you know most boat lockers don't fit kneeboards and rather than having it take up all the floor space in the boar you need a boat tower rack to store it safely and securely. We also know that if you have a tower on your boat you probably like to wakeboard as well. This rack has you covered, with one slot for your wakeboard and one slot for your kneeboard. The kneeboard slot is 4.15 inches wide and the wakeboard slot is 1 3/8 inches wide which should fit most boards.
This kneeboard and wakeboard boat tower rack is made from billet aluminum and polished to a mirror finish. Billet aluminum is extremely durable and will stand up to any conditions your throw at it. The other great thing about this wakeboard rack is the tower clamp can be mounted on any angled piece of your tower and still have the wakeboard line up horizontally. With the new swoop designs of many towers this is a MUST! This kneeboard and wakeboard rack also features soft rubber lining so your kneeboard and wakeboard will be cushioned while they are in the rack. There is also a bungeee strap that properly secures your boards so you don't have to worry about them falling out while you are driving.
Clamps and Swivels: Clamps and swivels accomplish the same task – they bind your rack to your boat’s tower. They are a necessary part of a rack system. Clamps simply lock onto the metal tubing of your boat’s tower to secure the rack in place. Swivels are an add-on that provide the functionality of …well, swiveling. To be clear, only a clamp + rack are required for a functioning rack system (the swivel is an optional add-on). In their normal storage position, clamps have the rack and your boards pointing out away from your boat. In order to remove or place wakeboards into your rack, you have to reach to the outside of your boat. The swivel allows you to easily spin the entire rack around to face the inside of the boat. This makes it much easier to switch out your boards. Swivels are an expensive add-on but are a HUGE convenience. Once you've used them, you'll be hooked and will be frustrated with the static style clamp.
Make sure you measure your wakeboard tower tubing size so you get the right clamp size (drop down menu above). The "clamp" is what goes around your wakeboard tower to hold it in place on the tower. There are many different tubing sizes for towers so make sure you pick out where you want your wakeboard rack and then measure using the procedure below.
Once you determine the perfect spot for your new wakeboard tower rack get a piece of string and loop it around the tower. Then measure how long the string was that went around the tower, this is your circumference. Use the table below and read across to find out what diameter tubing your tower is. The diameter is the size clamp you need. Select this size from the drop down menu above.
|Circumfrence (inch)||Diameter (inch)||Diameter (inch) Fraction|
(Including Alaska and Hawaii)
Great News - We have a dedicated International Store just for you!
It looks like you are visiting from outside the continental United States. If you would like to shop and ship any products outside the continental United States you must order from our International Store. It is optimized specifically for our customers outside of the continental United States.