The Cinch is the most affordable, easy-to-use, and minimalistic snowboard wall mount on the market. Designed to be easy-to-install and easy-to-use, the Cinch is everything you need in a snowboard rack in an ultra-affordable package. At the core of the Cinch are the abrasion-resistant SBR rubber bumpers. These bumpers provide a sturdy and rigid way to secure your board in place, but are soft enough to be safe for your board's edges.
The Cinch is designed to hold your board vertically and flat up against the wall. This means it takes up practically no more space than your snowboard! You can store your snowboard with or without bindings attached. This means it is a great way to show off your board AND be a quick-access storage rack for your daily rider!
Hey, this is Josh from StoreYourBoard, here today to talk about the Cinch Snowboard Wall Mount. Here is it behind me and here it is what’s actually included in there. It’s a very minimalistic rack but it looks awesome on the wall. What’s included are two rubber abrasion-resistant plugs. You got two drywall anchors and two screws. The way it works is you just lift it out and out, so we got two plugs mounted there. Put your snowboard in like this. Drop it down, and there it is! Awesome!
The way that we can do that is because almost all snowboards have an hourglass shape where if you look at the top common snowboard, it’s wider on the tip and the tail than it is in the center. So we use that fact and these rubber plugs to make this very simple mount that’s super minimalistic but does the job, holds it on the wall nicely.
The way we do that is you need to measure your board at the tip, so here we’re talking about you know this is about 11.5, 11.5 at the tip and then where we usually tell people to mount them is right above the bindings. That’s typically a good mounting spot. So on this board, we’re talking right about 10.5 there, so you see there’s about an inch difference and that’s all we need to make this work and then it’s even skinnier here in the very center. It’s about 10 inches.
To do this, you want to take that measure. We have about 10.5, so I have some predrilled holes here already. We include the drywall anchors, so feel free to use those. Our set here is all wood, so we just drill right into it. The key thing to note though is because the hole is in the center of this rubber stoppers, you actually need to add 3/8 to each side or 3/4 total, so right here, I got 10.5; I added 3/4.
What you do is take your drill. You can do it with a power drill or just a regular hand screwdriver. Put the screw inside the rubber stopper and go ahead and drive it in. Great like that. You’ll know that the screw is actually in-set in this. You want to make sure it’s nice and snug but you don’t want to drive it too hard. With some of these power drivers, you can basically drive it right through if you’re trying.
Go ahead and put the other one up. There we go. Easy as that, so that’s what looks like on your wall without the snowboard in. Then you go ahead and take your snowboard. Like I said, you want to put it in where it’s thinner and then drop it down so it catches where it’s wider right like that. There it is. Awesome, awesome snowboard mount. It looks super great and you can kind of bring it out from the wall on the stoppers a little bit, so you don’t really mess up, mar up your wall, so there we go.The Cinch Snowboard Mount from StoreYourBoard. Thank you.
EASY TO INSTALL, GREAT PRICE!
Our snowboards have been living against one wall of the garage, and I have to remind folks (mostly my kids) as they get in and out of my truck to be careful not to bump into them or they'll slide down and fall over. These wall mounts were perfect to get them up off the floor and out of the way.
I did have one issue: the tip of the wall anchor (one of them) broke off in the sheet rock as I was screwing it in. I got some needle-nose pliers and extracted it, and decided the remaining portion of the wall anchor would probably be enough to still do the job. And so far so good.
Just what we needed to hang my sons snowboard. The only hiccup was I tried using the wall anchor and it wouldn't go in to the wall. It just kept boaring a bigger and bigger hole in the wall! I sweet talked a repair man that was at my house to help me out. Turns out anchor not needed on my wall, because it is an outside wall, that has wood on the other side...."dry wall" anchor. Doh! See what happens when mom tries to hang stuff.:)
works well and is simple to install.
Good stuff. Delivery only took 48 hours from when I placed the order. I didn't use a level. I just eyeballed it and it works just fine.
This was exactly what I needed. In an apartment with a smaller bedroom getting my board off the floor and out of the way was a must. The Cinch works great and is easy to install. Board was mounted in 5 minutes!
Exactly what I was looking for in price and function. Very nice for upright mounting, sturdy and easy to hang.
Good product. I don't consider myself handy at all, but they're fairly simple to install. Only issue I ran into was that 2 of the dry wall mounts that came with my order broke during instalation and that caused some issues for me. All in all good product would recommend to others.
I painted my snowboard with chalkboard paint and hung it to use as art display.
This hardware is easy and minimal. Perfect.
These work really great! The directions are easy to follow and installation was
fast and easy. The boards are now up and out of the way (limited space)
Thank you so much.
Surprisingly easy to install and easy to use wall mount. Effectively hangs board tightly and flat against the wall for a dirt cheap price.
The mounts installed in minutes with a drill and a level. Now my bedroom has unique style and easy access to my shredstick.
Simple two screw installation. Basic, Easy, and friendly on the budget.
Great set up to display your stick. Easy in and looks great. Amazing for the price!!
very easy to install, simply drilling two level holes. The board sits beautifully flush with the wall, and it is easy to take the board on and off if installed correctly
great idea! the name says it all its a cinch and simple to install.
Easy install.. Board Looks great on the wall
works better than I expected
I love this mount - I was looking for a mount that was easy for me to install and that wasn't too bulky - this is it! I easily installed the mount using the drywall anchors that were provided. I followed the directions to a T yet I found that my board slid down much farther than a) I wanted look-wise, and b) I felt comfortable with as far as stability. I moved the anchors over to my original marking and even though I now have a gaping hole in my wall from the original install, I'm much more pleased with the way my board now sits. Its nice and snug up against the wall and I have no fear of it falling. This mount is awesome, and so reasonably priced! Just make sure you realize how far down the board will slide once you place it in the mount so that you can find the right placement on your wall the first go :)
Looks good in my man cave and cheap to boot. At first I was hesitant to pick these up because you can pretty much find everything at the hardware store. Decided to order them anyways and I'm happy I did. The rubber pieces are really the key.
(Including Alaska and Hawaii)
Great News - We have a dedicated International Store just for you!
It looks like you are visiting from outside the continental United States. If you would like to shop and ship any products outside the continental United States you must order from our International Store. It is optimized specifically for our customers outside of the continental United States.