The Vertical Surfboard Wall Rack is a no-frills, just-business wall rack designed to store and display your surfboards vertically.
Rack Construction and Design:
How many surfboards will it hold? This rack is set up with a base wood wall piece with 3 rack arms to hold 3 surfboards.
What surfboards will it hold? Whether you've got a thruster or a noserider longboard, this rack will store your board. Just mount the base rack piece at the height that is appropriate to fit your boards. There's also plenty of space between the rack arms for you to store your surfboards with their fins in, too. See our video review for a demonstration of fit for a variety of boards.
Function First. The Surfboard Wall Rack is part of our line of utilitarian, function-first storage racks. The rack will come with a completely natural finish - no stain or clear coat is applied. While we emphasize function over form, we still pay attention to aesthetics. Each rack base has round routered edges, a smooth sanded finish, and the drill holes are countersunk. Additionally, the foam is angle cut to sit flush against the base of the angled arms. The Surfboard Wall Rack comes with pre-drilled, countersunk holes so mounting is very quick and convenient. The rack also includes all necessary mounting hardware, so no trips to the hardware store are necessary.
Looking for a great deal? Check out the Clearance Version of this rack at over 60% off!
How’s it going today? I’m Andrew from StoreYourBoard.com, and we’ve got another product video for you. This is our Wood Surfboard Wall Storage Rack. It’s a great rack. It’s a no-frills rack, and it will store a lot of surfboards. We’ve got a version for three surfboards, six surfboards or nine surfboards, your choice. You can see the rack behind when it’s mounted. I’m going to show you how we set it up and set your boards up.
When you order the rack, it will come with rack sides and rack arms. If you get the three version, it’s going to come with one rack side; six, two; nine, three. Then there are three rack arms for each rack side. A little simple installation and setup. Insert the rack arms into the rack sides. We have some glue. It’s a very snug fit, so it’s a very secure setup for your boards. Once you get all three rack arms in, you’ll have a rack side that looks like this, and so you’ll set it up and mount to your wall. There’s countertop mounting holes all set up for you. Once you’ve done that, you’ll have a rack that looks like this.
I want to point out a couple of more features about the rack. The rack arms themselves have foam padding, so when you’re setting up your boards and pulling them out, they shouldn’t get damaged or dent. Also the rack arms themselves are about 15 inches wide, with 11 inches of space between the rack arms, so it’s a good set up and it’s specially accommodating even for longer fins. We have a variety of fins on these boards. We even have a fin with 8.5 inches. It still sets up well for this rack.
When you’re inserting your boards, you want to take care to lean them against the back piece and against the rack arms, so really there is an angle leaning against the rack arm. The boards are not going to sit straight up and down and that’s fine. That’s actually better for how we want them to set up, leaning against the rack for a fully stable fit. If you have boards, you can just set them up like this. And so again, this is a six version. We’ve got a three version. We’ve got a nine version. You can get as many boards as you want stored at home in your garage, in your basement wherever you need to store your surfboards. A no-frills approach to surfboard storage. Check it out at StoreYourBoard.com.
The wood pieces are small and my large 10 ft long board wobbles when I walk by it. I'm a bit nervous that it may break any time someone walks by...
Nice rack overall.
I do wish the supporting pieces were a few inches longer, so i could cut them to length. Some big longboards hang off the edge more than i would like. Also, some of the holes are too wide for the dowels, but i ended up solving that problem by gluing them in place.
All this being said, i just ordered the same thing again.
Very simple to install. Holds boards in place w/o any issues.
I would recommend.
Took a good amount of searching to find this site and type of rack. Glad I did. Garage space is tight, and this rack was perfect solution.
Still give this an excellent as the materials are good quality and install was easy. Only nit was the glue that came with the kit - not enough to glue one dowel. I had extra wood glue that I used instead.
Added security rope and cut a piece of astroturf for the flooring.
For the most part I liked the rack and it seems to be doing a good job so far. I had to drill my own hole because the studs were spaced further apart in my garage. Also one out of the three woden dowels didn't fit as secure as the other ones did, so i had to use a lot of glue to secure it. Shopping was quick and it didn't take very long to install.
difficult to pick a board based on conditions. We are just finishing a major remodel of the garage where we have moved all garage "stuff" to a second level and then made the side of the garage open to storing boards up to 10' in a vertical position with an opening in the ceiling to use these racks.
Haven't finished the garage but know this will be the best solution.
Will send photos when complete towards the end of September.
Great product, especially for the cost. Delivered on time. Would highly recommend this product.
No surprises: product met all advertised specifications, the accompanying parts kit was complete, shipping was fast. I would order here again.
This was a good product and so far serves its purpose for a budget friendly board storage. I had to end up using my own super glue to put it together but that was not a big deal to me
Shipping was fast. Setup was very easy... Makes my bedroom wall look like a surfshop! Great product!
I use one 3-board rack to store my long boards, and another 3-board rack - placed a little lower - to store my snowboards. They're not the prettiest racks in the world, but they seem sturdy, don't scratch my boards and are reasonably priced. Because I have wood flooring, I decided to set down some fake grass mats and now the boards don't scratch my floor.
When I found the product online it looked like a solid, well crafted board rack. However, the small alcove in my apartment that this is meant to go is not conducive for the slanted design, which was not clear when purchasing the rack. Storing the boards vertically does not make sense with this idiotic design flaw. I understand that it would probably work best for buying two units and storing longboards horizontally, but in the 10+ years I've stored boards, this takes the cake for the worst.
Very easy to install
I was going to spend a day building a new rack for my boards then found this one online. It's price competitive with a DIY rack, nicely designed, and easy to assemble. Most importantly, it does its job well, has gotten my wife off my back and saved me time, which I used to surf. Definetly would recommend.
These racks have made my surfboard collection much easier to access and keep out of the way. I was considering buying material amd building my own until a friend introduced me to storeyourboard.com. Great product and would/will buy again. Thank you.
We would like to purchase another one exactly the same. It looks great.
Was going to build myself a vertical rack for my boards but found storeyourboard.com and I'm psyched I did. Lots of smart subtle considerations in the design and it would have cost me about the same to make it myself. Great product, affordable and fast shipping.
Glue seemed to liquid but actually did a good job, I hope it will last. I will make sure we don't put stuff that's too heavy though, and I might cover the foam later with suede or something equivalent to look better. And I like the wood plank that we will paint the same color that the wall. Easy.
This is simple, well made and easy to install. I didn't rate it as Excellent for two small reasons:
1. The super glue included does not work to secure the pegs into the back board. The application for that calls for Elmer's glue or similar.
2. The securing screws included needed molly's and those were not included.
So a quick trip to the hardware store was needed when these items could easily been included. I would re-order!
Great product for organizing all of the surfboards in my family! Easy to install. I highly recommend it!
Not the prettiest surf rack I have ever seen but works well for my needs. Great deal to store 6 boards.
(Including Alaska and Hawaii)
Great News - We have a dedicated International Store just for you!
It looks like you are visiting from outside the continental United States. If you would like to shop and ship any products outside the continental United States you must order from our International Store. It is optimized specifically for our customers outside of the continental United States.